[Update] Galaxy S3 SGH-T999 stock supported USSD codes

If you post them i'll update this with a listing of all those that employment.
Some codes from i9300 don't work. do not post any not tested or not marked as dangerous.
Most of the golem secret codes solely work on Samsung stock computer storage, the dialer acknowledges the


code once entered and you do not need to hit send. Codes work on ICS and JB dialers, but
most aren't engineered into CM10 or AOSP
(if you erased any of the stock /system/app/*test*.apk clearly they will not launch)

[UPDATE -- there's some hysteria on the interwebs regarding exploits which will reset your S3.
All that's happening is for certain tel: links during a browser or NFC square measure loading numbers into the dialer
for you. once any golem cipher listed below is entered into the dialer it launches
the specific .apk or operate (like bring up or perhaps mill reset). you'll install a third party
dialer and set that because the default and avoid this. The codes do nothing in most non-stock
dialers. They are also gift on virtually each phone, not simply S3]


USSD Codes (T-mobile)
#BAL#
#MIN#
#MSG#
#SMS#
#WEB#
#NUM# -- returns your number
#FAM# -- Family allowance
#PWD# -- reset voicemail arcanum to last four digits of number
#PWO# -- toggles voicemail arcanum
#RON# -- change international roaming
#ROF# --disable international roaming
#TAXI -- calls a neighborhood taxi service adds $1.75 to your bill (US & Canada)

*NUM -- reads your line variety to you
*777 -- good Access client Care
*TOGO -- postpaid client Care add minutes
*ADD -- postpaid Service Center add minutes
611 -- client care
123 -- Voicemail

VSC/ MMI Codes (GSM)
Other GSM Supplementary Services codes
*#30# -- standing of incoming display
*#31# -- standing of outgoing display
*#35# -- standing of incoming SMS
*#351# -- standing of Incoming SMS If Roaming
*#33# -- standing of Outgoing SMS
*#331# -- standing of Outgoing International SMS
*#43# -- standing of telephony
*#21# -- standing Unconditional telephony
*#002# -- standing all Conditional telephony
*#004# -- standing Conditional telephony (busy, no answer, unavail)
*#61# -- standing of forwarding once no answer
*#62# -- standing of forwarding once not approachable
*#62# -- standing of forwarding once busy
*xx# -- allows feature
**xx# -- register and activate feature
*#xx# -- check standing of feature
#xx# -- cancels feature
##xx# -- cancel and deactivate feature
ie.
*61*1xxxYYYzzzz**10# -- sets no answer when ten seconds to forward to (xxx)YYY-zzzz
#31#2345678910 -- initiates decision to (234)567-8910 with outgoing display blocked
*43#2345678910 -- allows telephony and dials (234)567-8910
#35*0000*16# -- change SMS service (where 0000 is default Network exclusion password)
*35*0000*16# -- disable SMS service (block incoming SMS)

Android Secret Codes (SGH-T999)
Universal
*#06# -- IMEI

Samsung Dialer - [Source] [here] and in thread
*#0*# -- SensorDiagnotics [1]
*#03# -- NAND Flash S/N
*#80# -- Touchscreen noise take a look at (warning don't press power button)
*#251# -- Wakelock ON
*#250# -- Wakelock OFF
*#350# -- bring up
*#526# -- wireless local area network Engineering Mode
*#528# -- wireless local area network Engineering Mode
*#745# -- RIL Dump Menu
*#746# -- rectify Dump Menu
*#0011# -- ServiceMode [1]
*#0228# -- Battery standing
*#0283# -- Audio packet loopback take a look at
*#0289# -- Audio/speaker take a look at (Melody take a look at Mode)
*#0514# -- SysDump (System Dumps, logs, etc)
*#0588# -- Proximity detector take a look at
*#0589# -- light-weight detector take a look at Mode
*#0673# -- Audio/speaker take a look at (same as 0289)
*#0782# -- Real clock take a look at
*#0842# -- Vibration take a look at
*#1575# -- GPS management Menu
*#2263# -- RF Band choice
*#2663# -- Touchscreen FW and version
*#2664# -- HW touchscreen take a look at
*#3264# -- RAM CHECK (Version number)
*#4327# -- HDCP data (True/ false)
*#7769# -- PROXIMITY detector take a look at
*#7284# -- Phone Utility (USB Settings)
*#7353# -- Self take a look at (Menu of twelve tests to use)
*#7594# -- mill mode change termination on long press
*#8888# -- Service Mode (Read FTA hw version)
*#9900# -- System Dump Mode
*#9999# -- southwest Versions (AP, CP, CSC, FTA SW)
*#22235# -- measuring system detector data
*#86824# -- bit KEY SENSITIVITY
*#5238973# -- digital display kind
*#232331# -- BT take a look at
*#232332# -- ???
*#232337# -- BT address
*#232338# -- wireless local area network raincoat address & annotation mode
*#232339# -- wireless local area network Engineering Mode take a look at (TX & RX modes) (same 526)
*#272886# -- machine Answer choice
*#3214789# -- GCF Mode standing
*#8736364# -- OTA Update Menu
*#7412365# -- Camera computer code normal (Front/Rear Cam FW)
*#7465625# -- Personalization (Lock standing settings)
*#22558463# -- Reset Total decision Time
*#12580*369# -- Main Version (AP, CP, CSC, RF cal, HW Rev) (similar to 9999)
*#197328640# Service Mode
*#3282*727336*# -- System and Storage data (Data Usage Status)
*#273283*255*3282*# -- Adjust/Fill Message, Contact, Call Log, etc Limits
*#273283*255*663282*# -- information produce South Dakota Card
*#7328735824# -- heap ID


//*#7780# mill Reset (WARNING)
//*2767*3855# Full mill Reset (WARNING)
87976633 mill RESET



unconfirmed (may be i9300 codes)

*#32489# -- (Ciphering Info)
*#4238378# GCF Configuration
??*#872564# USB work management
??*#3214789650# LBS take a look at Mode
*#34971539# Camera computer code Update
*#7412365# Camera computer code Menu
*#301279# -- HSDPA/HSUPA management Menu
73876766 betrayal SMS ENABBLE
738767633 betrayal SMS DISABLE
7387678378 betrayal SELF SET take a look at MODE
7387677763 betrayal SMS SET PRODUCT MODE
4238378 GCF SETTINGS
4387264636 betrayal SMS MAIN
*#528# -- ?? Wireless computer network Tests
*#4636#
*#7465625# -- unlock? errors?
*#197328640# – sanctioning take a look at mode for service activity
**05***# – Execute from Emergency dial screen to unlock PUK code
??*#07# take a look at History
*#1234# read southwest Version personal organizer, CSC, MODEM
2886 ??


Also take a look at at command or adb with:
am broadcast -a golem.provider.Telephony.SECRET_CODE -d android_secret_code://XXXX wherever xxxx is code



*#1234# – personal organizer and Phone computer code data
*#1111# – FTA computer code version
*#2222# – FTA Hardware version
*#4636# – Phone data
*#44336# – Displays Build time and alter list variety
??*#44336# computer code Version data
*#8351# – allows voice dialing work mode
*#8350# – Disables voice dialing work mode


Disclaimer: We are not Responsible for any Damages that may be happened to your Device in the process that we mentioned in the following guide. If any issues happens, we will help you to resolve the problem. Also Keep in mind rooting will void your device’s warranty.

[Success] Flashing Samsung C3322 Logo Restart By Flash Loader

fileserve Click Here

File Mediafire : Click Here 

Flash File: Please Download in support Z3x



1) Execute the downloader

Execute the ‘Flash loader 7.4.7_SSG_v0.1_Lite.exe’ program.




(Notice : Flash loader supports only Single-CSC.)




2) Set Model

Click "SET MODEL", and you can select appropriate model.

You should choice "C3322_LAKOTA_Setting_v00.mdl" for further advance.




3) Select the binary, TFS, and CSC files

Click "Partition Table", and you can select a certain binary.

With browsing files, you can choice appropriate Flash-loader partition table all at once.




After that, you should activate TFS, CSC.

Also you can select the TFS files, and CSC files.

(Notice : The buttons of TFS and CSC need to be activated not only after phone image

is added first)




4) Select the download mode

Click "START" to ready to download binary.

(Notice : In this step, the mobile device actually don’t download the binary yet.)




5) Connect the device

First, power off the device with battery.

After that, connect PC with device using USB cable.

(Don’t detach your finger from two keys.)

In that case the device will power on and downloader recognize the device automatically




6) Complete download

The download process is automatically executed.

If "Slot freed for new download" message was shown without any problems, you now do

wnloads the binary successfully.

(Notice : After download process is completed, take care of the abnormal power off situ

ation(ex. mount/demount battery) within the first booting time. It may causes malfunction)




7) Confirm Download

- Reboot the device and confirm whether the device do normal operation.

- When completing download, downloader is automatically initialized and ready for

connecting next device.









1. open Flash loader 7.4.7_SSG_v0.1_Lite.rar (in extracts)

2. click set model, and select C3322_LAKOTA_Setting_v00.mdl (in firmware C3322XXKE3_OXE)

3. check "Application binary file", click browse,. PTT (in firmware C3322XXKE3_OXE)

4. check the "TFS File", click browse, select. tfs (in firmware C3322XXKE3_OXE)

5. check "CSC File", click browse, select. csc [(in firmware C3322XXKE3_OXE)

6. click start ..

7. press the volume 1 + 3 (many versions exist that 5 + 8 vol down + lock)